Overview
AP Electromagnetic Self-Braking Safety Brake(Electromagnetic Failure Safety Brake)isnormal-close design.It adopts wedge-shapeself-locking structure of braking and is equippedwith action monitoring switch for interlockingprotection and failure feedback,safe and reliable.Sensitive action,short action time,flexible braking;small size,light weight,easy to install and use,space saving.
Mainly used for middle and large crane,hoistingmechanism of port cargo handling machinery,minehoister,winch,belt conveyor,and cable car etc.,especially for casting crane and safety braking oflow-speed-shaft on other mechanism.When theworking brake is failed or drive shaft,gear andother parts of drive system is failed,it can be usedas emergency safety braking.
Product Features
Due to the unique braking principle doesn't need external power source,has more economics than similar braking products.
Special mechanical structure principle.Brakingtorque is proportional to the load that the greaterthe load,the greater the braking torque.It is safeand reliable.
Compact structure,light weight compared to othersame size of braking products.
Safety braking in case of driven system failure ormalfunction.It is the true failure safety braking.
The electromagnetic mechanism adopts
low-voltage DC control,high-voltage excitation andlow-voltage holding,which realizes energy savingand consumption reduction while improving safetyand life.
Operation Condition
Ambient Temperature: -20℃~+60℃
Used indoors with a relative humidity of notmore than 90%.If used in the open air or in dustyenvironments,a protective cover should beinstalled.
Power supply: AC380V/50HZ. If have special requirements,call our technical department when ordering.
Safety braking in case of driven system failure ormalfunction.It is the true failure safety braking.
If require explosion-proof function or otherpower supply to start the function,please call ourtechnical department before ordering.
Conform Standard
Product technical requirements conformto JB/T14900-2024 Caliper Brake.